Thursday, September 18, 2008

Albatros Progress Update...

Well despite all the video work (and a last minute road trip to Banff) it's been a busy month for the L-39. I've been jamming some insane hours (mostly those evil dark ones where birds chirp outside) into the flight dynamics and they are now 99.9% complete. It flies just as an L-39C should, on the numbers at all altitudes and speeds I'm quite proud to say, and feels just like my ride in Tyson's jet. Pitch and roll rates, acceleration, G-loading and limits, drag, takeoff and landing rolls, stability and such are all about as accurate as I can make them. It can even sideslip nicely on crosswind approaches now, no small trick to set up let me tell you.

I also discovered a solution for what seems to be one of the great flight modeling mysteries concerning jet engines in FSX, especially lower power ones like the L-39's AI-25TL, and that's properly modeled thrust at both low and high altitudes. Generally, getting a jet to perform properly speed wise at low altitude means screwing up its high altitude performance, and tweaking for the upper flight levels normally results in a very overpowered ride down low, something you're all familiar with I'm sure. That is not the case with this jet! From sea level up to her service ceiling of 37000 feet, and at any altitude in between, she pulls off the speeds and climb rates the real thing is capable of, no more, no less. A realistic increase in thrust from intake compression is also modeled. The L-39 is fairly underpowered when stationary or at low speed and relying solely on its engine's compressor stages. Fly faster and you have more net thrust available, up to a point. :)

So, the remaining 0.1 percent?: Spins. Can't quite get her to do them yet, and I think that's something I'll be fighting with until the very end. ;) There is definitely some dark voodoo involved in that, but with time she'll get there. Both my love and my hatred of the FSX .air file format have grown in equal portions over the past few weeks, haha, but the effort was worth it.

The external model has been given a lot of subtle fixes and tweaks as well, mostly in the cockpit and inlets, both areas were just grossly oversized and misshapen. A lot of the really fine curves on this plane I simply couldn't determine from photos, and so I must thank Tyson hugely again for the chance to crawl into and all over the real deal. It helped immensely. The pilots have also been increased in size to more realistic non-hobbit proportions. 'Gary', as you'll see in the pictures below, has also rejoined 'Ace' in the office at last. ;) A great number of shading and smoothing issues have also been fixed, and very few remain. Tyson's L-39's paint job has been done as well, and while it's by far the easiest paint I've ever made (rearrange a few parts and spam blue haha) it's also one of the coolest I think. She oozes menace. ;)

Also, much to my delight, Christoffer Petersen of Turbine Sound Studios has agreed to take on the formidable job of creating a full sound set for the plane, something I am simply not equipped or trained to do. My expertise ends at the pixel level. ;) By all accounts there are none better at this kind of work than Chris, and 'the best' is what I'm interested in here. :) The sound set should arrive sometime around December. AI sounds were also specifically on my shopping list, so, unlike most other addon jets, this thing will *not* sound like the default Lear 45 in multiplayer.

So with the external complete, except for a few minor non-critical tweaks, I will be doing the grand 'slice' tomorrow, a moment filled with joy and dread for me. The external and VC will become completely separate projects at that point and I'll be working full time now in XML 3D gauge land. This is the point in the project where vigilance for inconsistencies becomes truly important. Wish me luck, ugh!

Oh, and my sincere thanks to the sixty two people who responded to my flight dynamics/user preferences poll awhile back. That's a lot more feedback than I expected! I really appreciate your input and I have made my choices accordingly:

The L-39's handling properties are now designed for and will reward the hardcore fliers among us first. The slow engine spool up and unique 'coffin corners' in her flight model are all present. For example, if you forget to watch your airspeed and end up too slow on a shallow approach with low engine RPM, then all you have left to make up your mind about is which patch of ground you're going to put a virtual crater in. Any hope for recovery in that situation below about 500 feet AGL is marginal at best. The ground handling is fairly tricky now as well without nosewheel steering, relying solely on differential brakes. There might be an optional 'easy' mode config, we'll see. ;) If you don't have rudder pedals with differential braking ability, and desire to drive her around 'Top Gear' style, then I'd recommend getting a set at some point haha. I recommend CH Pro Pedals, they're virtually indestructible. My first set survived nearly twelve years of hard abuse.

Some piccies!






-lotus

9 comments:

Anonymous said...

I so dare you to add bump and specular to those rivets -_-

Lotus / Ramasurinen said...

Umm... the rivets do have bump and spec. ;)

I really hate rivets.

Anonymous said...

Some how I thought so, haha, but great stuff anyway.

Anonymous said...

HOOOOORAY!

Lotus / Ramasurinen said...

Haha, thanks for the enthusiasm! :)

Hooray indeed. 'Woot' in fact. She's really coming together well.

pebble said...

I can vouch for the amazing progress in the flight modeling. The L-39 is a pleasure to fly now. You guys are going to love it.

d0ugi3 said...

Is it as awesome as this....
http://www.breitling-jet-team.com/
:)

Lotus / Ramasurinen said...

Ehhh...Breitling. It's an iconic L-39 paint yes, probably the best known of all, but I don't like corporate sponsored anything really.

Nor do I like wristwatches. ;)

I may or may not do that paint myself. If someone wants to make it after the fact on their own though I have no problem with it.

We'll see.

Anonymous said...

If you don't do it, I will be, and along with a few others. So either way it's getting made :)